dmesg - Sony Vaio GLmark2 All
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Linux version 4.14.21-1-MANJARO (builduser@development) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Fri Feb 23 00:01:40 UTC 2018
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable
BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001dfdfffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.6 present.
DMI: Sony Corporation VPCSB4L1E/VAIO, BIOS R2087H4 06/15/2012
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1dfe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09B000000 mask FFF000000 uncachable
3 base 09C000000 mask FFC000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask F80000000 write-back
6 base 180000000 mask FC0000000 write-back
7 base 1C0000000 mask FF0000000 write-back
8 base 1D0000000 mask FF0000000 write-back
9 base 1DFE00000 mask FFFE00000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffffffffff2001b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff95ec00097000] 97000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x6a63a000, 0x6a63afff] PGTABLE
BRK [0x6a63b000, 0x6a63bfff] PGTABLE
BRK [0x6a63c000, 0x6a63cfff] PGTABLE
BRK [0x6a63d000, 0x6a63dfff] PGTABLE
BRK [0x6a63e000, 0x6a63efff] PGTABLE
BRK [0x6a63f000, 0x6a63ffff] PGTABLE
BRK [0x6a640000, 0x6a640fff] PGTABLE
BRK [0x6a641000, 0x6a641fff] PGTABLE
RAMDISK: [mem 0x36ef3000-0x37770fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony )
ACPI: XSDT 0x000000009AFFE120 000094 (v01 Sony VAIO 20120615 01000013)
ACPI: FACP 0x000000009AFFC000 0000F4 (v04 Sony VAIO 20120615 ACPI 00040000)
ACPI: DSDT 0x000000009AFF0000 0082C7 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: FACS 0x000000009AF6E000 000040
ACPI: FACS 0x000000009AF6E000 000040
ACPI: ASF! 0x000000009AFFD000 0000A5 (v32 Sony VAIO 20120615 ACPI 00040000)
ACPI: HPET 0x000000009AFFB000 000038 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: APIC 0x000000009AFFA000 00008C (v02 Sony VAIO 20120615 ACPI 00040000)
ACPI: MCFG 0x000000009AFF9000 00003C (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: SLIC 0x000000009AFEF000 000176 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: WDAT 0x000000009AFEE000 000224 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: SSDT 0x000000009AFED000 000CA6 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: BOOT 0x000000009AFEB000 000028 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: SSDT 0x000000009AFE9000 00022B (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: ASPT 0x000000009AFE6000 000034 (v07 Sony VAIO 20120615 ACPI 00040000)
ACPI: SSDT 0x000000009AFE5000 00073E (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: SSDT 0x000000009AFE4000 000996 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: SSDT 0x000000009AFE2000 0011B9 (v01 Sony VAIO 20120615 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001dfdfffff]
NODE_DATA(0) allocated [mem 0x1dfdf9000-0x1dfdfcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001dfdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000009ae3efff]
node 0: [mem 0x000000009afff000-0x000000009affffff]
node 0: [mem 0x0000000100000000-0x00000001dfdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001dfdfffff]
On node 0 totalpages: 1551324
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9849 pages used for memmap
DMA32 zone: 630336 pages, LIFO batch:31
Normal zone: 14328 pages used for memmap
Normal zone: 916992 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9ae3f000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 42 pages/cpu @ffff95eddfa00000 s134232 r8192 d29608 u262144
pcpu-alloc: s134232 r8192 d29608 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 1526927
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6007424K/6205296K available (10252K kernel code, 1163K rwdata, 2812K rodata, 1364K init, 992K bss, 197872K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 29435 entries in 115 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.791 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.81 BogoMIPS (lpj=7649303)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 4
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18365.25 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:35:58, date: 03/04/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95EDD7D2F000 00067C (v01 Sony VAIO 20120615 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95EDD7D3D400 000303 (v01 Sony VAIO 20120615 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF95EDD7D33600 000119 (v01 Sony VAIO 20120615 INTL 20100121)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x8000-0x803f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc9404000-0xc940400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc9409000-0xc94093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc9400000-0xc9403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc9408000-0xc94083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x8088-0x808f]
pci 0000:00:1f.2: reg 0x14: [io 0x8094-0x8097]
pci 0000:00:1f.2: reg 0x18: [io 0x8080-0x8087]
pci 0000:00:1f.2: reg 0x1c: [io 0x8090-0x8093]
pci 0000:00:1f.2: reg 0x20: [io 0x8060-0x807f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc9407000-0xc94077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc9405000-0xc94050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x8040-0x805f]
pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xc8400000-0xc841ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x7000-0x70ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xc8400000-0xc93fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:02:00.0: [8086:0091] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc7400000-0xc7401fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xc7400000-0xc83fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xc6400000-0xc6400fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xc6400000-0xc73fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xc5400000-0xc5401fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc5400000-0xc63fffff]
pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:05:00.0: reg 0x18: [mem 0xc3404000-0xc3404fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xc3400000-0xc3403fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xc4400000-0xc53fffff]
pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x1dfe00000-0x1dfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] could not be reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x2000] has been reserved
system 00:00: [io 0x2004] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SNY9014 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xc8420000-0xc843ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xc8400000-0xc93fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xc7400000-0xc83fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xc6400000-0xc73fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc5400000-0xc63fffff]
pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xc4400000-0xc53fffff]
pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xc8400000-0xc93fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xc7400000-0xc83fffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xc6400000-0xc73fffff]
pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xc5400000-0xc63fffff]
pci_bus 0000:04: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xc4400000-0xc53fffff]
pci_bus 0000:05: resource 2 [mem 0xc3400000-0xc43fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8696K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff95ec96e3f000-ffff95ec9ae3efff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
io scheduler bfq-mq registered
BFQ I/O-scheduler: v8r12 (with cgroups support)
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffa635c1800000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos: probe of 00:01 failed with error -16
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x10, revision=0x29
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1042536169, 0)->(1054246565, -11710396)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 10:899:587
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 1364K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1284K
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
libata version 3.00 loaded.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xc9409000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xc9408000
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xc9407000 port 0xc9407100 irq 30
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xc9407000 port 0xc9407300 irq 30
ata6: DUMMY
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata1.00: ATA-8: KINGSTON SHFS37A120G, 603ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SHFS37A BBF0 PQ: 0 ANSI: 5
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: MATSHITADVD-RAM UJ8A2AS, 1.20, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2AS 1.20 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 2294.790 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113fb5d4ae, max_idle_ns: 440795242406 ns
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1.2: new full-speed USB device number 3 using ehci-pci
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 3-1.3: new high-speed USB device number 4 using ehci-pci
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Remote File Systems.
EXT4-fs (sda1): re-mounted. Opts: discard
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2294690425 Hz
vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
systemd-journald[216]: Received request to flush runtime journal from PID 1
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
clocksource: Switched to clocksource tsc
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input4
input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input5
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (36 C)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
lpc_ich 0000:00:1f.0: No MFD cells added
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sony_laptop: handle 0x014b: keyboard backlight setup already done for 0x0143
sony_laptop: couldn't set up keyboard backlight function (-16)
sony_laptop: SNC setup done.
Linux agpgart interface v0.103
r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
r8168 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2017 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Adding 3999996k swap on /dev/sda2. Priority:-2 extents:1 across:3999996k SSDscFS
input: PC Speaker as /devices/platform/pcspkr/input/input6
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 410000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
acpi LNXVIDEO:02: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input8
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:29: registered as cooling_device6
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input9
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ATPX version 1, functions 0x00000032
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
media: Linux media interface: v0.10
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
mousedev: PS/2 mouse device common for all mice
Linux video capture interface: v2.00
r8168 0000:05:00.0 enp5s0: renamed from eth0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:64b5)
uvcvideo 3-1.3:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 3-1.3:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 3-1.3:1.0: Entity type for entity Camera 1 was not initialized!
input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
random: crng init done
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
enp5s0: 0xffffa635c0e2d000, f0:bf:97:ea:50:8d, IRQ 32
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
radeon 0000:01:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x104D:0x907B 0x00).
vga_switcheroo: enabled
snd_hda_codec_realtek hdaudioC0D0: ALC275: SKU not ready 0x411111f0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC275: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
ATOM BIOS: Sony
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 3010404 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
kfd kfd: DID 6760 is missing in supported_devices
kfd kfd: kgd2kfd_probe failed
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with d0:b2:c4:55:89:1f
wlp2s0: send auth to d0:b2:c4:55:89:1f (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with d0:b2:c4:55:89:1f (try 1/3)
wlp2s0: RX AssocResp from d0:b2:c4:55:89:1f (capab=0x1011 status=0 aid=4)
wlp2s0: associated
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d0:b2:c4:55:89:1f
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
NET: Registered protocol family 38
hidraw: raw HID events driver (C) Jiri Kosina
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
hid-generic 0005:045E:07A2.0001: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0001/input/input15
hid-generic 0005:045E:07A2.0001: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0002: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0002/input/input16
hid-generic 0005:045E:07A2.0002: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0003: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0003/input/input17
hid-generic 0005:045E:07A2.0003: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0004: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0004/input/input18
hid-generic 0005:045E:07A2.0004: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0005: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0005/input/input19
hid-generic 0005:045E:07A2.0005: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0006: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0006/input/input20
hid-generic 0005:045E:07A2.0006: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0007: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0007/input/input21
hid-generic 0005:045E:07A2.0007: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0008: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0008/input/input22
hid-generic 0005:045E:07A2.0008: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0009: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0009/input/input23
hid-generic 0005:045E:07A2.0009: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.000A: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.000A/input/input24
hid-generic 0005:045E:07A2.000A: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.000B: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.000B/input/input25
hid-generic 0005:045E:07A2.000B: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
pci_bus 0000:05: Allocating resources
wlp2s0: deauthenticating from d0:b2:c4:55:89:1f by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
[drm] PCIE gen 2 link speeds already enabled
ACPI: button: The lid device is not compliant to SW_LID.
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
[drm] ib test on ring 5 succeeded
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:09: Restoring backlight state
PM: suspend exit
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
enp5s0: 0xffffa635c0e2d000, f0:bf:97:ea:50:8d, IRQ 32
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
pci_bus 0000:05: Allocating resources
wlp2s0: authenticate with d0:b2:c4:55:89:1f
wlp2s0: send auth to d0:b2:c4:55:89:1f (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with d0:b2:c4:55:89:1f (try 1/3)
wlp2s0: RX AssocResp from d0:b2:c4:55:89:1f (capab=0x1011 status=0 aid=4)
wlp2s0: associated
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d0:b2:c4:55:89:1f
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
pci_bus 0000:05: Allocating resources
wlp2s0: deauthenticating from d0:b2:c4:55:89:1f by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
[drm] ib test on ring 5 succeeded
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:09: Restoring backlight state
PM: suspend exit
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
enp5s0: 0xffffa635c0e2d000, f0:bf:97:ea:50:8d, IRQ 32
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
hid-generic 0005:045E:07A2.000C: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.000C/input/input26
hid-generic 0005:045E:07A2.000C: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 54:64:d9:8c:54:36
wlp2s0: send auth to 54:64:d9:8c:54:36 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 54:64:d9:8c:54:36 (try 1/3)
wlp2s0: RX AssocResp from 54:64:d9:8c:54:36 (capab=0x411 status=0 aid=8)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
hid-generic 0005:045E:07A2.000D: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.000D/input/input27
hid-generic 0005:045E:07A2.000D: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
hid-generic 0005:045E:07A2.000E: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.000E/input/input28
hid-generic 0005:045E:07A2.000E: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.000F: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.000F/input/input29
hid-generic 0005:045E:07A2.000F: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
[drm] GPU HANG: ecode 6:0:0x87ffffb8, in xonotic-linux64 [4092], reason: Hang on rcs0, action: reset
i915 0000:00:02.0: Resetting chip after gpu hang
i915 0000:00:02.0: Resetting chip after gpu hang
i915 0000:00:02.0: Resetting chip after gpu hang
i915 0000:00:02.0: Resetting chip after gpu hang
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff95edc341bc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff95edc341bc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa635c2a32118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
hid-generic 0005:045E:07A2.0010: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0010/input/input30
hid-generic 0005:045E:07A2.0010: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0011: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0011/input/input31
hid-generic 0005:045E:07A2.0011: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7
hid-generic 0005:045E:07A2.0012: unknown main item tag 0x0
input: Microsoft Sculpt Comfort Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/bluetooth/hci0/hci0:36/0005:045E:07A2.0012/input/input32
hid-generic 0005:045E:07A2.0012: input,hidraw0: BLUETOOTH HID v1.29 Mouse [Microsoft Sculpt Comfort Mouse] on 88:53:2e:d0:c2:f7